【45cm】 Mobile Antenna, Antenna Base, MP, Enhanced Ground, Noise Reduction

Thank you for visiting.

This is a ground wire for when your antenna is not a non-radial type, or when you cannot get a ground due to antenna base mounting position issues or if the base is a stick-on type.
Furthermore, strengthening the ground can improve transmission and reception sensitivity and reduce noise.

★ All materials used in this product are made in Japan.
Braided copper wire: TBC 15mm width
Crimp terminals: JST (Japan Solderless Terminal)
Insulation caps: Nichifu

When the correct terminal is crimped to the correct wire thickness with the correct tool, a number will be stamped as shown in image 4.
In the case of this product, since the copper wire is 8sq (square), it is crimped with the tool's 8 and stamped with 8.
This is essential for the electrical constructor's exam.
Please check this point if you are considering other products.

★ Vehicle side terminal inner diameter: 8.4mm

★ This is the price for [20cm].
We can create it for an additional 220 yen per 10cm (or 110 yen per 5cm).

★ Example
20cm: 1,680 yen
30cm: 1,900 yen
40cm: 2,120 yen
45cm: 2,230 yen ← This product
50cm: 2,340 yen
60cm: 2,560 yen
70cm: 2,780 yen...

※ [Length] refers to the [length of the copper wire].
For 20cm, the distance from the center of the hole on both terminals to the center is approximately 243mm.
(Please allow for slight variations.)

★ Ships via Yu-Packet Post mini for anonymous and tracked delivery.
Delivery is completed by posting to your mailbox, so time designation is not possible.

★ Other products from our store can be found here.
#next_stage_jp

★ No instruction manual is included.

※ Discounts and receipts are not available.

※ Warning
Reproduction of product images and descriptions is strictly prohibited.

Shipping schedule has been updated.
To prevent trouble,
please be sure to read our profile before purchasing.

Thank you.